KEEP THINGS MOVING WITH THE JUMBO TOP FEEDER

The FEEDMASTER® Jumbo Top Feeder is designed to handle very large sized blank sheets of corrugated material. It receives a stack of material, lifts it up, divides it into measured blocks, inverts each block, and then feeds sheets off the bottom of the block onto the extendo in a continuous shingled stream for delivery into the finishing machine hopper.

FEATURES:

• Automatic stack centering aligns incoming stacks (+/-12”)

• Accepts incoming stack heights up to 72” tall

• Patented floating block pusher cleanly separates blocks from the stack

• Patented block inverter with automatic block squaring

• ActiveTrak® belt tracking system keeps lift and separation conveyor belts on center

• Variable height shingle gate with hold-down roller feeds board in a straight shingled stream

• Pneumatically powered linear-guided side and back tampers straighten board into the finishing machine hopper

• Powered Waste Sheet Gate Assembly

• Zero-energy electrical and pneumatic lockouts

• 220” long extendo (collapsible to 140”) with individually tensioned conveyor belts

• Hydraulically powered extendo positioning and extension system with mechanical safety lockouts

• Four point semi-automatic lift conveyor lockout with pneumatic actuation

• Interlocks for stack supply conveyor and finishing machine

• Main control panel with AB Compact Logix PLC controller

• Secondary extendo control panel at downstream end of extendo

• Infeed Operator Station