GET THINGS MOVING WITH THE B.C.E.S

The bundle centering ejection system has two functions, the first function is to center bundles on the feed gate center line of a Flexo Folder Gluer (FFG) as they exit the counter ejector, when the counter ejector is offset to the drive side or operator side of the feed gate centerline.

The second function of the bundle centering ejection system is to eject, bundles with bad glue flaps when the third-party inspection system (by others) sends a bad bundle signal to the bundle centering ejection system. Bundles will be diverted off the system to the operator side for operators to inspect. If no signal is received, then the bundle centering eject system will center bundles and not eject the bundle.

1. Powered Line Shaft Conveyors

2. Operator control station

3. XY Centering Conveyor

4. Gravity Feed Conveyor

5. Powered Diverting Conveyor

6. Exit PBC Conveyor

7. XY Ejection Conveyor

Not shown (for clarity): Manually Moveable Power Line Shaft Conveyor

FEATURES:

• 4.3” Touch screen operator interface for easy operation

• Siemens S7 PLC controller commands all machine operations

• Zero-energy electrical and pneumatic lockouts

• Backstop on gravity feed conveyor to keep bundles from falling

• Manually Moveable Power Line Shaft Conveyor 13' (for TBS rollout)

• Can be delivered as a right-hand or left-hand machine (left-hand shown above)

• Interlocks for bundle supply and load exit conveyors

• 24 Volt DC control voltage