|
Bulletin number: SB100-02
Category: Maintenance
Date
issued: October 17, 2002
Machine models: ASC/Pallmac Jumbo Prefeeders
Subject: Potential weldment defect
Back to Index
To our valued customer:
This service bulletin is part of an ongoing
effort to provide quality service and support for all Alliance
Machine Systems International, LLC products. If you need assistance
or more information, please call Gary Kneale, Field Service Manager,
at 509-535-0356 and select Option two.
Description of Problem
We have identified a potential problem with the
pusher assembly on the ASC/Pallmac Prefeeder. There was an incident
where a weld failed on the cross tube weldment, allowing the pusher
assembly to drop down onto the lower conveyor.
Back to top
The weld on the pusher assembly should be
inspected for visual cracks, paint chips, or signs of material
deformation. The weld should also be checked to ensure that it
conforms with the weld symbols as indicated on the attached weldment
drawing. Any welds that are not to specification should be repaired
to the drawing specification by a certified welder.
Back to top
Enclosures
This service bulletin is accompanied by the
following documents:
-
D12734
= Pusher support arm, right hand, pivoting
-
D12735
= Pusher support arm, left hand, pivoting
Back to top
Back to Index |
